-
PRODUCTS
S(B)H25-30~2500/10 three-phase double-winding non-excited oil-immersed transformer (amorphous alloy)
Classification:
Keywords: dry-type transformer series | oil-immersed power transformer series | special transformer series | box-type transformer series
Immediate ConsultationProduct Introduction
Amorphous alloy power transformer is a new generation of environmentally friendly transformer. Its core is made of amorphous alloy material from the United States, and the oil tank is manufactured by a domestic corrugated oil tank automatic production line, featuring a fully sealed, maintenance-free structure. It has low noise, low loss, safety, and energy-saving properties, making it widely applicable in urban network projects, residential communities, as well as public places such as hospitals and schools.
1. The amorphous alloy core is of a wound core structure, three-phase five-column type, with a rectangular cross-section. Amorphous alloy is a type of "non-crystalline metal" where the physical state has metal atoms arranged in a disordered manner. The material thickness is only 0.02mm, manufactured using advanced "planar spray casting method." This material, which is completely different from the crystalline structure of silicon steel sheets, is more conducive to magnetization and demagnetization.
2. The coil is rectangular, multi-layered, made of oxygen-free copper wire, and the inter-layer insulation uses adhesive paper with dot patterns to increase its mechanical strength.
3. The amorphous alloy power transformer features an aesthetically pleasing corrugated oil tank, which is produced through an advanced oil tank automatic production line, undergoing strict water pressure leak tests, air pressure tests, and fluorescence tests to ensure the reliability and safety of the product.
Model Description
Normal Operating Conditions
Altitude: ≤1000m
Maximum ambient temperature: +40℃, maximum monthly average temperature: +30℃, maximum annual average temperature: +20℃, minimum temperature: -25℃
Power supply requirements: approximately sine wave, three-phase roughly symmetrical.
Installation location: indoor or outdoor environment without obvious dirt. Note: Transformers used under special conditions must be specified at the time of product ordering.
Technical Performance Parameters
| Rated Capacity (kVA) |
Rated Voltage (kV) |
Loss (W) |
Short Circuit Impedance (%)) |
||||
| High Voltage (kV) |
Tap Range (kV) |
Low Voltage (kV) |
No Load | Load | |||
| Dyn11 /Yzn11 |
Yyn0 | ||||||
| 30 | 10 | ±2×2.5% | 0.4 | 25 | 510 | 480 | 4.0 |
| 50 | 35 | 735 | 700 | ||||
| 63 | 40 | 880 | 840 | ||||
| 80 | 50 | 1060 | 1010 | ||||
| 100 | 60 | 1270 | 1215 | ||||
| 125 | 70 | 1530 | 1450 | ||||
| 160 | 80 | 1870 | 1780 | ||||
| 200 | 95 | 2210 | 2100 | ||||
| 250 | 110 | 2590 | 2470 | ||||
| 315 | 135 | 3100 | 2950 | ||||
| 400 | 160 | 3660 | 3480 | ||||
| 500 | 190 | 4380 | 4170 | ||||
| 630 | 250 | 5020 | 4.5 | ||||
| 800 | 300 | 6075 | |||||
| 1000 | 360 | 8340 | |||||
| 1250 | 425 | 9720 | |||||
| 1600 | 500 | 11745 | |||||
| 2000 | 550 | 14000 | 5.0 | ||||
| 2500 | 670 | 16230 | |||||
Qualification Certificate
Product Qualification
Longxiang has always relied on innovation-driven and open cooperation, upholding the enterprise spirit of "diligence, preciseness, truth-seeking and pragmatism", and has won the support and affirmation of more and more partners.
Patent Certificate
Longxiang takes innovation drive as the core power, relies on the technology research and development and management system as the support, focuses on the research and development and production of transformers, various box-type transformers and substations, and high and low voltage electrical appliances. It has obtained a number of industry certifications and has held a number of patents.
Related Products
Online Consultation
Nantong Longxiang Electrical Equipment Co., Ltd.
sweep, mobile version!
Copyright©2024 Nantong Longxiang Electrical Equipment Co., Ltd. 丨Tag l Powered by 300.cn
86-13057026999